Daily Maintenance of Automatic Air Bubble Making Machine

The automatic air bubble making machine is a key equipment widely used in packaging, entertainment, and industrial fields. Regular and standardized daily maintenance can effectively extend the service life of the machine, ensure its stable operation, reduce failure rates, and maintain the quality of bubble output (such as bubble size uniformity and output stability). This guide details the daily maintenance items, operation standards, and precautions of the automatic air bubble making machine, which is applicable to most types of automatic air bubble making equipment.

1. Pre-Startup Inspection (Daily, Before Turning On the Machine)

Pre-startup inspection is critical to prevent failures; complete all items carefully for safe startup.

• Power Supply Check: Inspect power cords, plugs, and connections for damage, aging, or looseness. Ensure power meets requirements (AC380V for industrial models) and electrical components (circuit breaker, fuse) are intact. Test the emergency stop button.

• Air Supply System Check: Verify air pressure is stable (0.4-0.8MPa). Check for air leakage at pipes, valves, and air pumps; repair or replace damaged parts promptly. Clean the air filter to ensure unobstructed intake.

• Bubble Solution System Check: Ensure sufficient matching bubble solution; replace if turbid or smelly. Check pipelines and nozzles for blockages, clearing gently with a soft brush or copper needle.

• Moving Parts Inspection: Check bubble wheels, shafts, and bearings for jamming, wear, or looseness. Ensure adequate lubrication; add specified oil/grease if needed.

• Control Panel Check: Verify indicators, buttons, and displays work normally. Ensure parameter settings match requirements; adjust if deviated.

• 
  

2. In-Operation Maintenance (During Machine Operation)

Monitor the machine in real time during operation to handle potential issues promptly for stable running.

• Real-Time Operation Monitoring: Observe for abnormal noise, vibration, or odor. Stop immediately if bubbles are uneven, fragile, or output drops to avoid further damage.

• Temperature and Pressure Monitoring: For heated/cooled models, keep temperature within rated range. Maintain stable air pressure; check for leaks or filter blockages if fluctuating.

• Solution Supplement and Cleaning: Add bubble solution timely to avoid dry running. Regularly wipe the bubble wheel and nozzle with a soft cloth to prevent clogging.

• Electrical System Monitoring: Check electrical control box and motor for overheating; stop to cool and troubleshoot if too hot.

• 
  

3. Post-Shutdown Maintenance (Daily, After Turning Off the Machine)

Thorough post-shutdown maintenance is essential to protect the machine and extend its service life.

• Power and Air Supply Cutoff: Turn off the main power, air, and solution supply. Unplug if unused for a long time to avoid electrical faults.

• Thorough Cleaning: Empty and clean the solution tank with warm water (neutral detergent if needed), rinse and dry. Soak the bubble wheel in warm water, brush clean, and blow pipelines with a high-pressure air gun. Wipe the machine surface; avoid strong chemicals.

• Lubrication Maintenance: Apply specified oil/grease to moving parts. Check and replace lubricating oil if turbid or deteriorated.

• Inspection and Arrangement: Inspect for damage, looseness, or wear; tighten or mark damaged parts. Store in a cool, dry, well-ventilated place; cover with a dust cover if unused long-term.

4. Regular Maintenance (Supplement to Daily Maintenance)

Perform regular maintenance per usage frequency and manufacturer requirements for long-term stability.

• Weekly Maintenance: Clean or replace air and solution filters. Check air pipe and power line tightness; replace aging parts. Inspect and replace worn bubble wheels.

• Monthly Maintenance: Inspect the electrical system for loose connections or damage. Calibrate gauges and sensors. Check hydraulic systems (if any) for leaks and replace oil if needed.

• Quarterly Maintenance: Disassemble, clean, and inspect key moving parts; replace worn ones. Maintain the air pump and motor; clean internal pipelines.

• 
  

5. Maintenance Precautions

• Perform maintenance only after cutting power and air supply; never maintain a running or hot machine.

• Use specified oil, bubble solution, and parts; do not mix oils or use inferior solution.

• Use soft tools for cleaning; do not flush electrical components with water to avoid short circuits.

• Record maintenance details (time, items, issues, solutions) for tracking and troubleshooting.

• Stop using faulty machines, hang a "faulty" sign, and contact professionals; do not disassemble unauthorizedly.

• Train operators to master the machine’s structure, operation, and maintenance to avoid improper use.

Strictly implementing these measures ensures the machine’s good performance, reduces failures, extends service life, and improves efficiency while cutting maintenance costs.

If you encounter any problems during the maintenance process or have further questions about the operation and maintenance of the automatic air bubble making machine, please feel free to contact us at any time. Our professional team is always ready to provide you with timely and professional support and solutions.